Marc Palmer

I was thinking about nuclear generation and it occurred to me that the NIMBYism of people towards wind farms is nothing to that of the NIMBYism that would occur if there were plans for nuclear power stations on the same site

I appreciate the reasons for people like George Monbiot (for whom I have huge respect) and other prominent greens declaring that nuclear may be our only realistic option (or part) at the moment to make massive CO2 cuts.

On a pragmatic level I agree, but emotionally I cannot, like many others I am sure. Nuclear power stations obviously will not be located so near to people, but my point is that actually even those in favour of nuclear power wouldn’t want to be living near to one – no matter what the safety record is relative to other power industries.

Would you really be happy for one to be placed near to your family’s house? For the benefit of the world?

I have to say, that I would answer “no” to this – and I think the vast majority of people will.

So is the only reason nuclear might be acceptable to the masses, the fact that it will be located far away from them? That would be a realisation of deep-seated (and I would say natural) distrust of a technology that can (if rarely) have such dire consequences.

So to accept siting of these power stations “over there somewhere”, is to say “I think its risky but as long as it might be a problem elsewhere I don’t mind”.

I don’t understand why Governments do not appear to be legislating for fuel efficiency displays, alerts and advice systems in cars. These are very cheap measures that would surely make a huge difference to all vehicle drivers, in terms of their fuel costs as well as environmental impact. It could also help combat speeding.

For example, I think all cars should be forced to:

• Show the user current MPG at ALL times, something that cannot be hidden or deactivated. It must also cope with more than 99.99 MPG – an extremely irritating limitation of both the Toyotas I have owned.
• Show the user current average MPG at ALL times.
• Add a red/yellow/green indicator lamp next to the current MPG and average MPG, so the driver is constantly aware of how they are driving. People who don’t study their MPG are often unaware of what is a good or bad figure for their particular vehicle.
• For manual transmissions, add a simple indicator suggesting a more appropriate gear if the efficiency is currently poor – eg “Try changing down to 4th”.

It can be very hard to drive economically even if you watch a standard MPG counter as so much depends on the temperature of the engine and incline of the road. Some reasonably simple logic and sensors could make the car educate people.

Something like this could easily become as ubiquitous as peoples’ reliance on navigation tools like Tom-Tom systems. A retro-fit kit would probably pay for itself within a year in fuel savings alone – so making them mandatory could be a real boon. Of course whether a retrofit is possible on older cars is another matter.

My family and I just got back from The Ragged Hedge Fair, a small "green" family-oriented festival. We had a great time, and it was a good feeling to be somewhere where they obviously cared a great deal about the impact of the festival. All the power was wind and solar, for all the tents and stages – not a single bit of grid power. Even the "floodlights" by the toilets were running off batteries, presumably charged by solar or other means – contrast with The Larmer Tree Festival which had a hideous generator running all the time to keep the lights by the camp site toilets on.

All of the food was organic (which actually meant, frankly, there was not really enough variety available sadly) and everything was setup for meticulous recycling of everything except the kind of thing that can only go in landfill. They even had composting loos on site in addition to the typical chemical toilet / blue juice hell boxes.

I saw two people using their Apple iPhone, which was an interesting juxtaposition of basic, sustainable, renewable lifestyle against the highest tech you can get in a phone right now. Next to a stand where a man had hand-built a mud and straw pizza oven the day before to cook and sell his pizzas, there was somebody who I believe was a performer (apologies if that is your normal dress) having a conversation on his iPhone.

I also got to see the documentary about how Cuba survived their localized Peak Oil calamity in the 90s. Something like 85% of the produce grown in Cuba is organically grown – truly stunning. Even more so that so much of it comes from pretty urban market gardens. Cuba’s organic pesticides and fertilizer technologies may well come to save our arses when Peak Oil hits the rest of us.

There was also a great band called Mamienco from France, playing a sort of fusion between punk, latin and French folk – really excellent. I particularly like the bass clarinet and the bearded bass player/singer who went from exotic French crooning to growling rock scream. A sort of folky Mr.Bungle!

A year ago I wrote about the insulation challenges facing our new house.

Since then we have spent a lot of money on improving the property. The cavity walls we have were much disputed and one guy did put a camera into the wall and found a cavity but said they wouldn’t be happy to fill the cavity with insulating material because the cavity looked like it was bridging in places.

Anyway, we replaced all the windows recently (more about that in another post soon) and I can tell you that we definitely do have a cavity, albeit narrow, having seen it for myself when the old window frames were taken out. It looks like cavity insulation will not be possible however, based on their previous comments.

We have now insulated the roof space, which was a very tricky job. The roof timbers come down into the top of the external walls at floor level of the 1st floor, so the entire first floor is "in the eaves". The remaining 50% or so of the surface area of the ceiling space on the 1st floor was flat ceiling that could be easily insulated in the loft. Last winter these rooms were seriously cold – when it was sub 5C outside you could feel cold air pouring down on your face at night from the eaves, which lets face it was like living in a shed – the part of the room covered by the eaves consisted of circa 8mm plasterboard, an air gap of around 100mm about 1mm of felt, and about 10mm of concrete roof tile – with air circulating in there.

We didn’t want to pull the ceilings down to insulate, and taking the roof off was a major project. We only had 100mm or so void between the roof timbers, but luckily almost all of them had storage cupboards at the edges of the rooms. So what we did was get some brave masochists to climb into these tiny cupboards and push 50mm thick Celotex foil-backed phenolic insulation boards up towards the apex of the roof until they hit the perlins (timbers that run perpendicular to the roof timbers.

This was no mean feat, requiring measuring and cutting a great many slices of Celotex boarding and forcing them up one after another as they had to be a snug fit and the small cupboards did not allow full length pieces to be cut, so each pair of rafters needed three or more chunks of celotex cut to fit. We also had to cut a new opening into one of the stud walls in one room, to create a new cupboard on that side of the room so this process could be carried out on both sides of the room. Not such a bad thing given that we have gained a storage cupboard.

Finally in the loft void, which we had already discounted as storage space (if you’re going to put it in the loft… you probably don’t need it so freecycle it!), we laid 50mm Thermafleece batts between the rafters up to the exposed edges of the celotex boards that came up to the perlins, then dumped about 20cm Warmcel paper insulation on there, and then covered that all over with another layer of 50mm Thermafleece batts. This wool-paper mush-wool sandwich was used to contain the Warmcel paper insulation which could blow around and cause a lot of mess when the wind blows a lot outside.

All in all it took two guys about 2 weeks to do this work – they also put celotex in the vertical stud walls of the cupboards – for a total of 4 under-eaves cupboards – and nailed plasterboard over everything to tidy it up and reduce drafts. So including materials and VAT (ARGH! Why is there VAT on domestic insulation materials?) it was pretty expensive.

However, it has made a huge difference to the 1st floor. We’ve had some pretty hard frosts already and the house is nothing like as cold as it was last year. It’s not warm all the time, but it definitely isn’t freezing – now the main source of cold is air leakage into the 1st floor floor space, coming up through the gaps in the floorboards, an altogether different problem…

The energy crisis looms as we all know.

I had a daft idea a while ago, but who knows one day it may not be so daft.

Basically, all the time our workplaces and public spaces are seeing the production of energy that is "wasted":

1. Overhead lighting is ubiquitous and falls on surfaces that do not do anything useful with it
2. People are walking around (exerting pressure on the floor) and this is doing nothing
3. There is a lot of noise generally, especially in large retail spaces
4. People heat the spaces they are in with their exhalation

For (1) and (2) I wonder if you’d ever be able to make a rugged "smart" floor tile that generates power from light that falls on it (similar to PV but able to be walked on) and from the pressure of peoples’ footsteps on it.

For (3) and (4) perhaps this new method of converting heat and sound into electricity will be possible.

A common thread between them all is the use of piezoelectric devices or similar methods of producing current from pressure.

It’s probably a silly idea and the efficiency would be so low as to be useless, but I don’t know… there’s a lot of heat generated by people, a lot of excess heat in some places (i.e. air conditioning could be obsoleted – a massive win), and across the world there are billions of people walking over man-made surfaces in buildings.

People are already studying the acoustic effects of the force of footsteps on floors I presume for gait-recognition as a kind of security/biometrics thing. Oh, it seems someone else has already had a variation of this idea but with ideas for magnets in shoes as well as some other pressure-related generation – magnets soundscompletely unlikely, you’d need to get both the building and the pedestrians to play ball. Getting just one half on board would be tricky enough.

The other crazy or rather more depressing energy generation of the future I can imagine is effectively the enslavement/exploitation of people in developing nations to generate power for us. It’s not too hard to imagine a company setting up somewhere offering slave-labour pay rates to people to turn cranks or walk treadmills 12 hours per day, to feed the developing countries’ over-inflated energy demands.

I’m sure people would say that something like this would be more equitable than investing in huge amounts of solar PV cells in equatorial countries, as it would boost the economies of the countries by providing income for people who are previously unable to find work. Ugh.

Update: Duh, why haven’t we hooked up all those treadmills in gyms to at least help power the lights and equipment in the gyms? Fat power!